|
Is Sodium Hydroxide Better Than Potassium Hydroxide?
How often should I clean lines?
What about brewing cleaners for my wine line?
Beverage System Cleaners : Points To Consider
Routine Line Cleaning
Problem Line Cleaning
Line Cleaning Frequency
|
Problem Line Cleaning
- Acid cleaning is recommended at least biannually on all systems and every time for problematic glycol-cooled and other long draw systems.
- Drain all beer from lines
- Rinse line using clean water
- Re-circulate an alkaline cleaner solution for the period of time recommended by the chemical manufacturer
- Rinse with fresh water
- Flush lines using an acid cleaner solution for the period of time recommended by the chemical manufacturer
- Rinse lines with clean rinse water
- Test the rinse water at the faucet for pH of 6.5-7.5 using pH paper or pH meter
- Fill and pack line with beer
- Pour beer, check to make sure the beer is good with no off-flavor, no excessive foam and no cleaning solution contamination.
- Information supplied by Draught Beer Guild
|
